Washable Leather Door Bottom Seal Strip – Anti-Collision, Dustproof, Windproof, Insulating, and Soundproof
Washable Leather Door Bottom Seal Strip – Anti-Collision, Dustproof, Windproof, Insulating, and Soundproof
🌬️ 𝐓𝐨𝐭𝐚𝐥 𝐃𝐫𝐚𝐟𝐭 𝐁𝐥𝐨𝐜𝐤𝐢𝐧𝐠: Dual cylinder barrier locks room temperature in and blocks outdoor cold air to lower energy bills. 🤫 𝐍𝐨𝐢𝐬𝐞 𝐑𝐞𝐝𝐮𝐜𝐭𝐢𝐨𝐧: Dampens disruptive hallway sounds and foot traffic so you can enjoy uninterrupted sleep and concentration. 🐜 𝐏𝐞𝐬𝐭 & 𝐃𝐮𝐬𝐭 𝐁𝐚𝐫𝐫𝐢𝐞𝐫: Forms a continuous floor seal that stops creeping insects and settling dirt from entering living areas. ⚡ 𝐓𝐨𝐨𝐥-𝐅𝐫𝐞𝐞 𝐈𝐧𝐬𝐭𝐚𝐥𝐥: Slides securely under standard doors in seconds without tape, drilling, or sticky residue. 🧼 𝐄𝐚𝐬𝐲-𝐂𝐥𝐞𝐚𝐧 𝐋𝐞𝐚𝐭𝐡𝐞𝐫: Water-resistant, wipeable outer skin rinses spotless under the tap without soaking internal foam.
BUNDLE & SAVE
Couldn't load pickup availability
Washable Leather Door Bottom Seal Strip – Anti-Collision, Dustproof, Windproof, Insulating, and Soundproof
COMFORT STARTS AT YOUR DOOR
SEAL THE GAP. KEEP COMFORT IN.
A dual-foam door draft stopper designed to help reduce drafts, dust and everyday gaps beneath your door.
A simple addition to help make your home feel more comfortable.
THE SMALL GAP THAT MAKES A DIFFERENCE
TIRED OF DRAFTS, DUST AND UNWANTED GAPS?
The space beneath a door can allow air movement, dust and some household pests to pass through. It may also let sound travel between rooms.
Covering the gap can help reduce unwanted airflow and limit the passage of dust beneath the door.
A PRACTICAL DESIGN
DUAL FOAM. ONE SIMPLE SOLUTION.
Two foam cylinders sit on either side of the door, helping cover the bottom gap as the door moves.
The dark, textured exterior gives the door seal a neat appearance that suits many everyday interiors.
EVERYDAY BENEFITS
A MORE COMFORTABLE HOME STARTS HERE
01. Draft Reduction
Helps cover the gap beneath the door to reduce unwanted airflow.
02. Dust Barrier
Helps limit dust and small debris passing through the bottom gap.
03. Easy-Care Surface
The outer cover is designed for convenient everyday cleaning.
NO COMPLEX INSTALLATION
SLIDE INTO PLACE IN SIMPLE STEPS
Position the foam cylinders beneath the door and adjust the fit to suit your door and floor clearance.
STEP 01
OPEN THE DOOR
Make enough room to position the door seal.
STEP 02
SLIDE INTO PLACE
Position the foam tubes beneath the door as illustrated.
STEP 03
CENTER & ADJUST
Align the seal and check that the door can move freely.
THOUGHTFULLY ENGINEERED
DESIGNED FOR EVERYDAY LIVING
The dual-foam construction is designed to sit along the bottom of a door, while the textured exterior provides a finished appearance.
Check the fit against your door thickness and floor clearance before use. The door should open and close without excessive friction.
MADE FOR YOUR SPACE
COMFORT FOR MORE ROOMS
Use the door seal in suitable rooms where reducing drafts or limiting dust beneath the door would be helpful.
Bedroom
Help reduce drafts around the bottom of the door.
Home Office
Help limit airflow and some sound transmission through the gap.
Living Space
Help limit dust and drafts passing beneath suitable doors.
CHECK THE FIT
PRODUCT DIMENSIONS
Review the illustrated measurements and confirm your door's width and bottom clearance before purchasing.
Length
95 cm
Width
11.6 cm
Measurements are based on the supplied product description. Verify the dimensions and trimming instructions against the actual product before publishing.
SIMPLE EVERYDAY CARE
EASY TO USE & CLEAN
Keep the door seal looking neat with routine care according to the material and manufacturer's instructions.
01. Position: Slide the seal beneath the door as shown in the product instructions.
02. Adjust: Center the two foam tubes and check door movement.
03. Clean: Wipe the outer cover with a suitable damp cloth, unless the manufacturer specifies rinsing.
04. Dry: Allow the product to dry before placing it back if it becomes wet during cleaning.
NEED TO KNOW MORE?
FREQUENTLY ASKED QUESTIONS
Helpful information before choosing your door draft stopper.
1. What does a dual foam door seal do?
It sits beneath a door to help cover the gap and reduce unwanted airflow and the passage of dust. Its effectiveness depends on the door, floor and fit.
2. How do I install it?
Follow the illustrated instructions: open the door, slide the seal into position, center it and check that the door can open and close freely.
3. Will it fit every door?
Not necessarily. Check the listed dimensions, door thickness and floor clearance before ordering. Door construction and available space affect compatibility.
4. Can it help reduce cold drafts?
Covering the gap can help reduce airflow beneath a suitable door. Results depend on the size of the gap, fit and surrounding conditions.
5. Does it block all noise?
No. Covering a door gap may reduce some sound transmission through that opening, but it is not complete soundproofing.
6. Can I trim it to fit my door?
The supplied product description says the foam cylinders can be trimmed. Confirm the manufacturer's cutting instructions and which parts may be cut before making any adjustments.
7. How should I clean it?
Follow the care instructions for the actual product. A suitable damp cloth may be appropriate for the exterior, but do not soak or rinse the product unless the manufacturer confirms that method is suitable.
8. Will it keep every insect or pest out?
It may help reduce passage through the covered gap, but it cannot guarantee that all pests will be kept out. Other entry points may still exist.
A SMALL CHANGE FOR EVERYDAY COMFORT
MAKE YOUR SPACE FEEL MORE COMFORTABLE
Help reduce drafts and dust beneath a suitable door with a simple dual foam design.
Choose your available product options above and use the store's Add to Cart button to order.